VoiceLift Pro Microphones User Guide • VLM Kit Installation and Operation
9
VLH 302 Microphone Features
Rear
A
B
C
Front
Side
+
E
F
D
Figure 4.
VLH 302 Microphone Features
A
Power Switch
— Slide up to power on and down to power off.
B
Power Status LED
— Dual color LED (green and red) indicates power or Link status.
LED indicators when the microphone is powered on and in use:
LED Color
Indication
LED off
Microphone is OFF or battery is not installed.
Green – steady
Microphone ON and paired to receiver
Green – single blink
Volume adjusted (increased or decreased).
Red – slow blinking
Low battery (30 minutes or less of talk time left).
Recharge battery.
Red – steady
Battery life depleted. Recharge battery
Red and green – alternating
blink
Microphone in discovery mode and attempting to pair
with receiver.
LED indicators when the microphone is charging:
LED Color
Indication
Red – steady
Battery charging
Green – steady
Battery fully charged
Red and green – alternating
blink
Incompatible, faulty, or failed battery detected.
Check and replace battery.
C
Auxiliary Stereo Audio Input
— 3.5 mm stereo input accepts line level audio signals,
but does not support external lavalier/lapel microphones. When an active aux input
device is connected, the built in microphone is disabled. The audio from the auxiliary
audio source is summed to mono and transmitted to the receiver.
D
Link button
— This button is used to enable pairing mode.
EF
Volume buttons
— Increase ( ) or decrease ( ) the microphone volume.
Summary of Contents for VoiceLift Pro VLS 3001
Page 8: ...viii ...
