VNR 100 • Reference Information
24
Attaching the rack rails to a standard rack
The rack rails come in two sections.
NOTES:
•
The rail assemblies are specific for left and right.
•
The longer rail section attaches to the front of the rack.
•
The shorter rail section attaches to the rear of the rack.
•
The rear rail section goes to the outside of the front section (closer to the rack and
further from the VNR 100).
Adjust Sliding Rail
End Flange
Stud
Rail Slot
Rack Mounting Rail
Rail Mounting Brackets
1
1
2
2
3
3
4
4
Figure 19.
Assembling the Rack Rails
1.
Assemble rack rail by pressing the stud of the rear rail section through the expanded
hole of the front rail section (figure 19,
1
).
2.
With the stud seated in the slot of the front section, adjust the sliding rail until the total
length matches the depth of the rack (figure 19,
2
).
3.
Use the locking screws to secure the assembly at the required length (figure 19,
3
).
4.
If required, rail mounting brackets (up to three on each rail assembly) can be secured to
the bracket mounts on the outside surface of the rack rail (figure 19,
4
).
End Flange
Adjust Sliding Rail
Rack Mounting Rail
Rail Mounting Brackets
1
1
1
1
Figure 20.
Mounting the Rack Rails to a Standard Rack
5.
Place the flanges against the front and back posts of the rack and secure the assembly
to the rack (figure 20,
1
).
NOTES:
•
Ensure that the right and left side assemblies are at the same height.
•
Ensure the rail guides are facing forwards.
Summary of Contents for VNR 100
Page 6: ...VNR 100 Contents vi ...