VNR 100 • Panels and Cabling
8
Panels and Cabling
This section provides information on:
•
Rear Panel Features
•
Front Panel Cover
•
Front Panel Features
Rear Panel Features
A
B
C D
D
E
H
G
F
Figure 5.
VNR 100 Rear Panel
A
AC power connector
— use a standard IEC power cord to connect the recorder to a
100 to 240 VAC, 50 or 60 Hz power source.
B
PS/2 port for mouse (optional)
— connect a PS/2 mouse to this port, if required.
C
PS/2 port for computer keyboard (optional)
— connect a PS/2 keyboard to this
port, if required.
D
USB ports (2)
— used to connect a mouse and keyboard for the initial configuration.
There are a total of four USB inputs: two rear panel and two front panel.
E
RS-232 control port
— use an Extron control cable (not provided) to connect the
VNR 100 to a control PC.
F
VGA output connector
— connect a local VGA monitor to this output.
G
Ethernet port 0 (eth0)
— use an RJ-45 cable to connect this port to the primary
network (the VN-Matrix network).
H
Ethernet port 1 (eth1)
— is not functional. Do not connect this port to a network.
Summary of Contents for VNR 100
Page 6: ...VNR 100 Contents vi ...