Extron electronics VNR 100, User Manual, Page: 25 / 44

VNR 100 • Replacing the VNR 100 Drives 19
3. Click
Login
. The VNR 100 Recorder Settings
page opens (see the figure to the right).
Once mounted, the capacity of the new drive
will be shown under Disk free space. This takes
a few seconds.
4. If you are inserting a blank drive, click
Format
.
ATTENTION:
When inserting a drive that
contains previously recorded content,
do not use the
Format
option as this will
remove all data.
ATTENTION: Lorsque vous insérez
un driver avec du contenu enregistré
auparavant, n’utilisez pas l’option
« Format » au risque de supprimer des
données.
When the formatting is complete, the message
formated to ext3
will appear next to the
Format
button.
5.
Click
Apply Changes
.
6.
Logout
of the config screen.
Monitoring Free and Used Disk Space
To monitor the amount of free disk space and the percentage of disk space used, see the
Data Disk information on the VNR 100 Web page (see the figure above).
Directory and File Structure
Use the Enterprise Controller Website to view the directory and file structure of the VNR 100
media disk.
1. Enter the
IP address
of the Enterprise Controller in the address bar of your browser.
2. At the login screen, enter the
username
and
password
.
3. If necessary, click on the
Devices
tab of the Enterprise Controller Web page.
4. Select the VNR 100 of interest from the list of devices.
5. Click
Recorder
in the Action buttons at the bottom of the screen. A popup window
opens showing the home directory for the recorder.
6. Click on the directory icon to show the files contained in the directory.
Figure 16. Recorder File Structure
Network settings [eth0]
Recorder settings
User settings
Data disk
IP Address
Subnet Mask
Gateway
Serial
Controller IP
Controller port
MTU
New password
Confirm New password
192.168.254.254
255.255.255.0
192.168.254.253
192.168.254.254
5432
1500
1111999
mounted to /home/matrix_rec/Recording_Files
Disk free space: 19GB->98% used
formated to ext3
status:
Umount
Format
Apply Changes Cancel Changes
Logout
VNMatrix recorder settings