VersaTools
®
MTP Series • Reference Information
VersaTools
®
MTP Series • Reference Information
Specifications, Part Numbers, Accessories, cont’d
Rack mount
MTP T AAP Series ........... Yes, with optional rack panel, or furniture-
/wall-mountable with optional AAP
mounting plates
MTP T 45 Series ............... No, but mountable in a 45 mm x 45 mm
opening in common European wall boxes,
floor boxes, or cable channel systems
All other models .............. Yes, with optional 1U rack shelf, part
#60-190-01 or 60-604-01; or VersaTools
®
rack shelf, part #60-190-20 or 60-604-20.
Also furniture-mountable with optional
brackets.
Enclosure type .............................. Metal
Enclosure dimensions (Depths exclude connectors and cables.)
MTP T AAP Series
Faceplate ................... 1.4" H x 3.5" W x 0.1" D
(3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space AAP plate)
Transmitter ............... 1.2" H x 2.75" W x 1.75" D
.0 cm H x 7.0 cm W x 4.4 cm D)
MTP T 45 Series
Faceplate ................... 1.8" H x 1.7" W x 0.8" D
45 mm H x 45 mm W x 20 mm D
Device ........................ 1.1" H x 1.6" W x 1.2" D
29 cm H x 41 mm W x 30 mm D
All other models .............. 1.7" H x 2.2" W x 3.0" D
(1U high, one-eighth rack wide)
4.2 cm H x 5.6 cm W x 7.6 cm D
Product weight ............................. 1.0 lbs (0.5 kg)
Shipping weight ........................... 3 lbs (2 kg)
Vibration ....................................... ISTA 1A in carton
(International Safe Transit Association)
Listings (all models except MTP T AV 45 and MTP T SVA 45)
UL, CUL
Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
All nominal levels are at ±10%.
Specifications are subject to change without notice.
A-5
A-4
Nominal level ............................... -10 dBV (0.32 Vrms)
Maximum level ............................ >+2.4 dBu (balanced or unbalanced) at
1%THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu.
Audio output — audio models (A, AV,
SVA models) only
Number/signal type
MTP T Series (all models) 1 set of proprietary analog signals
MTP R AV, MTP R SV A
1 stereo, balanced/unbalanced
MTP R AV/SV A RCA .... 1 stereo, unbalanced
Connectors
MTP T Series .................... 1 female RJ-45 (shielded)
MTP T AAP Series ........... 1 female RJ-45 on a 3" (7.6 cm) pigtail
MTP T 45 Series ............... (1) 8-pin spring force wire connector
MTP R AV, MTP R SV A
(1) 3.5 mm captive screw connector, 5 pole
MTP R AV/SV A RCA .... 1 pair of RCA female
Impedance
MTP R AV, MTP R SV A
50 ohms unbalanced, 100 ohms balanced
MTP R AV/SV A RCA .... 50 ohms unbalanced
Gain error ...................................... ±0.1 dB channel to channel
Maximum level (Hi-Z) ................ >+3.3 dBu, balanced or unbalanced at
1%THD+N
Maximum level (600 ohm) ......... >+2.0 dBm, balanced or unbalanced at
1%THD+N
General
Power ............................................. Supplied by an external power supply
External power supply ............... 100 VAC to 240 VAC, 50/60 Hz, external,
autoswitchable; to 12 VDC, 1.0 A,
regulated
Power input requirements ......... 12 VDC, 0.2 A
If the distance between the transmitter and receiver is less than
500' (150 m), you can connect a power supply to only one device
in a transmitter/receiver pair. If the distance between
transmitter and receiver is greater than 500' (150 m), connect a
power supply to each device.
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
