manualshive.com logo in svg

Extron electronics StudioStation 100, User Manual

Share
Download
Extron electronics StudioStation 100 User Manual Download Page 77

StudioStation 100 • Web-Based User Interface

70

6

  To change the minimum available recording time on the storage device, enter a number 

into the 

Time

 field (see 

figure 67

 on the previous page) or click the 

Up

 and 

Down

 

arrows to adjust the value.  The time range is 2 to 30 minutes. The default setting is 10 
minutes. The StudioStation 100 will start recording when the selected storage device 
has more than 10 minutes of recording time left.

NOTES:

• 

The default recording destination on the StudioStation 100 is the USB drive 
attached to the RCP 101.

• 

The disk space alarm is triggered when the remaining record time is less than 
10 minutes.

7

  Click the 

Save

 button.

8

  Alternately, click the 

Cancel

 button if you do not want to save the changes.

Summary of Contents for StudioStation 100




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands