Extron electronics StudioStation 100, User Manual

Page: 38 / 131

StudioStation 100 • Web-Based User Interface 31
1
Device Status
— This single page (see figure 11 on the previous page) provides a
view of the status of the input and outputs along with details of the active recording and
stream (the current event). The URLs of the streams are also displayed on this page.
2 Recorded Events
— The three pages within this tab provide a calendar view
of previous and current recording events, as well as scheduling and publishing
configuration options (see
Recorded Events on page 39).
3 Configuration
— The eight pages within this tab contain the core controls typically
needed during initial setup, or for upgrading the unit, or restoring a configuration. They
make it possible for an administrator to configure basic AV input settings, such as:
•
Output video test patterns for setup.
•
Configure output stream settings and presets.
•
Set up AV encoding and presets, select or configure layouts and layout presets.
•
Set passwords, set up notices and alarms, and select preview window settings.
The
Configuration
pages also provide a way to configure basic communication,
identity, time, data storage, and recording location settings. These pages also
make it possible to update firmware or restore a configuration from a saved file (see
Configuration on page 42) .
4
File Management
— This page provides a way to view folders and files on the
internal drive and any attached external drive. It also provides a way to connect the
StudioStation 100 to shared network drives (see
File Management on page 60).
5 Troubleshooting
— The five pages within this tab display factory-defined and
user-defined information about the unit and the encoded streams, display a log of
events and a log of alarms and their status, provide three simple diagnostic tools for
checking network connections, and provide a way to perform a variety of types of
resets on the StudioStation 100 (see
Troubleshooting on page 63).
6 StudioStation
— This page provides an easy way to connect the StudioStation 100
to the IPL T PC1 and test the connection (see StudioStation on page 69).
Pages Within Tabs
The
Recorded Events
,
Configuration ,
and
Troubleshooting
tabs each include
several pages. To access each page, click the corresponding function within the second tier
of tabs (sub-tabs) located below the main tabs near the top of the screen (
Configuration
> Input/Output Settings
shown selected in figure 12).
Figure 12. Pages Within Tabs (Subtabs)
Panels and screen sections
Each StudioStation 100 web page contains at least one panel and a main window with
sections that group the controls and information for each page. Most panels include
controls and a variety of adjustments and settings. Specific sections can include controls
or simply display information. Sections or panels can include tabs with additional selections
and options.
All StudioStation 100 web pages include the
AV Controls
panel at the left of the screen
(see
AV Controls Panel
on page 34). The
Device Status
page is the main page and
also serves as the main operating interface. It contains one panel and three sections. Pages
such as the
Systems Settings
page within the
Configuration
tab include several panels,
each with a different collection of information and settings.
figure 12