H
Menu Navigation (MENU and NEXT)
– Lights amber (unless menu lockout is
enabled). Press to access and navigate the configuration and control menus and
submenus.
NOTE:
The menu button blinks red when there is an active alarm (see
Alarms
on
page 45).
MENU
— Use this button to enter and move through the main menu system.
NEXT
— Use this button to step through the submenus of the menu system.
I
Adjust knobs
(left
[
and right
{
)
– Rotate these controls to scroll through menus
and to make adjustments within a menu or submenu.
NOTE:
The buttons and controls on the SMP 351 can be locked so that
configuration using the front panel is not possible (see
Front Panel Lockout
(Executive Modes)
on page 44).
J
I/O display
– A stack of four green LEDs that correspond to the four digital I/O
connections on the rear panel (see
figure 3
on page 12). Each LED indicates the
on or off status of the corresponding ports which can be configured as digital input or
digital output (see
About the FlexOS App - Digital I/O Configurator
on page 149).
SMP 351 • Front Panel Operation
20
