SF 3PT User Guide • Installation
9
10.
Secure the red and the black speaker wires coming from the cable to the tie-off point
using the tie-wrap.
Tie-Wrap
Tie-Off
Point
Figure 8.
Speaker Wires Tie-Off Point
11.
Route the steel cable from the bottom of the compression fitting
1
and through one
side of the steel cable guide in the speaker bracket.
Steel Cable
Anchor Screw
Steel Cable
1
1
2
2
3
3
4
4
Steel Cable
Guide
Figure 9.
Anchoring the Steel Cable to Speaker
Next, loosen the steel cable anchor screw
2
and pull the steel cable tightly under the
captive washer of the screw
3
, then tighten the screw
4
. Pull the free end of the steel
cable through the other cable guide in the bracket.
NOTE:
It is not required to remove the outer jacket from the steel cable.