SF 3PT User Guide • Installation
8
7.
Using the guide on the side of the splicing connector, strip .43 inch (11 mm) from the
ends of the black and red wires coming from the cable. These wires will be inserted into
the 2-pole splicing connectors of the speaker.
.43" (11 mm)
DO NOT TIN
the wires.
8.
Lift the splicing connector lever
1
and insert the stripped end of the red wire into
the empty pole of the connector
2
that is attached to the red wire coming from the
speaker. Press the lever down to lock the red wire in place
3
.
1
1
2
2
3
3
Figure 6.
2-pole Splicing Connector
Next, lift the connector lever
1
and insert the stripped end of the black wire into the
empty pole of the connector
2
that is attached to the black wire coming from the
speaker. Press the lever down to lock the black wire in place
3
.
9.
The speaker wires are now connected at the back of the speaker.
2-Pole Splicing
Connectors
Figure 7.
Connected Speaker Wires