NAV SD 511 Scaling Decoder • HTML Operation
57
USB page
The
USB
selection on the
General
Settings
page (see
read-only pane (see figure 57) that shows the status of the USB 2.0 port (see
on page 7).
The port can be turned on and off and it can be configured by clicking the
EDIT
button (
1
).
An editable version of the selection opens (see figure 58).
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
*
* If the endpoint is set to Host mode only.
Figure 57.
USB Selection
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
*
* If the endpoint is set to Host mode only.
Figure 58.
Editable USB Selection
1
USB Port
— Click to toggle the port on and off.
NOTE:
If you turn the USB port off, the port does not appear on the
Ties
page.
2
Mode
— Click the drop-down list to select between
Device
and
Host
.
NOTES:
•
Host
mode allows a host device such as a PC to be connected or accepted to
that endpoint.
•
Device
mode allows devices to be connected or accepted to that endpoint.
•
You can
only
tie a USB host to a USB device for proper system operation.
•
Do not connect a host to an endpoint that is in USB device mode.
