Extron electronics NAV SD 511 User Manual Download

Page: 25 / 90

NAV SD 511 Scaling Decoder • Installation

Performing Mode 4 and 5 Resets

Perform resets of the unit as follows (see figure 9):

Use a small screwdriver to press and

hold

the rear panel

RESET

button until the rear

panel

RESET

LED blinks either:

•

Twice, for an IP settings reset

•

Three times for an absolute (factory) reset

Release, then

immediately

press and release again.

RESET

Release, then

immediately

press and release again.

6 seconds

9 seconds

Press and

hold

the

Reset

button.

Press and

hold

the

Reset

button.

Reset LED blinks

twice

Reset LED blinks

three times.

IP Settings

Reset

Factory
Reset

(Mode 4)

(Mode 5)

Figure 9.

Resets

Release the

RESET

button and then immediately press and release the

RESET

button

again. Nothing happens if you do not momentarily

RESET

within 1 second.

Summary of Contents for NAV SD 511



























































































Search results

Summary of Contents for NAV SD 511

Reviews:

Related manuals for NAV SD 511

Brands by name

Popular brands

Extron electronics NAV SD 511, User Manual

Search results

Summary of Contents for NAV SD 511

Reviews:

Related manuals for NAV SD 511

Brands by name

Popular brands