Extron electronics MTPX 1616 User Manual Download Page 32

Page: 32 / 124

Operation, cont’d

MTPX Twisted Pair Matrix Switchers • Operation

3-6

PRELIMINAR

Preset button and LED —

The Preset button and LED have two primary

functions (•) and two secondary functions (

❏

•

Activates

Save Preset

mode to save a configuration as a preset and

Recall

Preset

mode to activate a previously-defined preset. See “Using global

presets” on page 3-22.

•

Blinks when

Save Preset

mode is active and lights steadily when

Recall

Preset

mode is active. See “Using global presets” on page 3-22.

❏

With the Enter, View, and Esc buttons, selects

Serial Port and Audio/

RS-232 Input Configuration

mode. See “Selecting the rear panel Remote

port protocol and baud rate” on page 3-42.

❏

Selects 19200 baud for the rear panel Remote port in

Serial Port and

Audio/RS-232 Input Configuration

mode and indicates the selection.

See “Selecting the rear panel Remote port protocol and baud rate” on

page 3-42.

View (

) button and LED —

The View (

) button and LED have two primary

functions (•) and five secondary functions (

❏

• Selects a

View-only

mode that displays the current configuration.

View-only

mode also provides a way to mute and unmute the audio or RS-232

outputs. See “Muting and unmuting audio/RS-232 outputs” on page 3-20.

• Indicates that

View-only

mode is active.

❏

Decreases the audio level of the selected input. See “Viewing and

adjusting the TP input audio level” on page 3-26.

❏

Indicates a negative (attenuation) audio level. See “Viewing and

adjusting the TP input audio level” on page 3-26.

❏

Decreases the volume of the selected output. See “Viewing and adjusting

the local output volume” on page 3-32.

❏

With the Enter, Preset, and Esc buttons, selects

Serial Port and Audio/

RS-232 Input Configuration

mode. See “Selecting the rear panel Remote

port protocol and baud rate” on page 3-42.

❏

Selects 38400 baud for the rear panel Remote port in

Serial Port and

Audio/RS-232 Input Configuration

mode and indicates the selection.

See “Selecting the rear panel Remote port protocol and baud rate” on

page 3-42.

Esc (

) button and LED —

The Esc (

) button and LED have two primary

functions (•) and five secondary functions (

❏

• Cancels operations or selections in progress and resets the front panel

button indicators.

The Esc (

) button does

not

reset the current configuration, the Video button

and Audio selection button, any presets, or any audio gain or attenuation

settings.

• Flashes once to indicate that the escape function has been activated.

❏

Increases the audio level of the selected input. See “Viewing and

adjusting the TP input audio level” on page 3-26.

❏

Indicates a positive (gain) audio level. See “Viewing and adjusting the

TP input audio level” on page 3-26.

❏

Increases the volume of the selected output. See “Viewing and adjusting

the local output volume” on page 3-32.

Summary of Contents for MTPX 1616





























































































































Search results

Summary of Contents for MTPX 1616

Reviews:

Related manuals for MTPX 1616

Brands by name

Popular brands

Extron electronics MTPX 1616, User Manual

Search results

Summary of Contents for MTPX 1616

Reviews:

Related manuals for MTPX 1616

Brands by name

Popular brands