Extron electronics MTP 15HD A Series, User Manual

Page: 19 / 33

15
MTP 15HD A Series • Installation and Operation
Installation and Operation, cont'd
j
DIP switches
Horizontal Sync (H Sync +) switch — Set this
switch up for positive horizontal sync (or positive
composite sync if the Composite Sync switch is on)
or down for negative sync.
Vertical Sync (V Sync +) switch — Set this switch up for
positive vertical sync or down for negative sync.
N For H Sync + and V Sync +, most devices use
negative sync.
Composite Sync (C Sync) switch — Set this switch up for RGBS
or down to output RGBHV or RGsB video. See the table below.
Output signal
format from
the receiver
Input signal
format to the
transmitter
Receiver's DIP
switch settings
C Sync SOG Video
RGBHV
RGBS RGBHV
RGsB
RGBS
RGsB
RGsB
Component
S-video
Composite
RGBS
RGsB
RsGsBs RsGsBs
Component
S-video
Composite
Sync-on-Green (SOG) switch — Set this switch up for RGsB
video (when the input is RGBHV or RGBS) or down to output
RGBHV, RsGsBs, or RGBS video. See the table above.
Video switch — Set this switch up for RsGsBs, RGsB,
component/S-video/composite video or down to output
RGBHV or RGBS video. See the table above.
N Set the Composite Sync, SOG, and Video DIP switches
as shown in the table above for the various input and
output video formats.
ON
1 2 3 4 5 6
H SYNC
+
V SYNC
+
C SYNC
SOG VIDEO END UNI
T