12
MTP 15HD A Series • Installation and Operation
d
Audio input connector
— Plug a 3.5 mm stereo audio
plug into this jack for unbalanced audio input. Wire
the plug as shown in figure 7.
Sleeve ( )
Ring
Right (-)
Tip
Left (+)
Figure 7 — 3.5 mm stereo audio plug
The stereo audio input is summed and output on the TP cable as
mono audio.
Twisted pair connection and settings
e
Pre-Peak switch —
The Pre-Peak switch alters the TP signal
output to correct for long cable runs.
See the table
on page 4 for
suggested switch settings based on the transmitted video
format and transmission distance.
f
Output connector — Connect one end of a TP cable to this RJ-45
female connector on the transmitter.
Connect the free end of the same TP cable to the RJ-45 female
connector on the receiver. See “
TP cable termination
” on
page 17 to wire the RJ-45 connectors.
AUDIO
