14
MLC Plus 84 EU and MLC Plus 84 MK • Setup Guide (Continued)
©
2015-2018 - Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners.
www.extron.com
Overall Configuration Procedure for the Controller
Step 5:
Configure the IP settings
of the MLC Plus 84.
See the
network
communication
setup instructions
Create a new GC Professional or GC Plus project
and add the MLC Plus 84 to it.
Configure controller ports.
Configure controller buttons.
Step 7: Test the system, make
adjustments, finalize configuration.
Save the project.
Step 4: Cable the MLC Plus 84, then apply power.
Cable all devices (see step 4).
Step 2: Prepare the installation site.
Step 1: Get ready.
Step 3: Change buttons or faceplates, if desired
Step 8: Mount the MLC Plus 84.
Create monitors, schedules, timers, macros,
and local variables.
Build and upload the configuration to the controller.
Step 6
If desired or required, install a new
security certificate (via Toolbelt).
Within Global Configurator
(GC Professional or
GC Plus mode):
Figure 18.
Overall Configuration Steps
See the
network
communication
setup instructions
on page 9.
68-2346-51
Rev. C
09 18
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide
on the Extron website.