manualshive.com logo in svg

Extron electronics IN1604 DTP, User Manual

Share
Download
Extron electronics IN1604 DTP User Manual Download Page 53

IN1604 DTP and IN1604 HD Scalers • Configuration Software

47

Configuration 
Software

The Extron Product Configuration Software (PCS) offers another way to control the scalers 
via USB connection in addition to the SIS commands.
This section describes the software installation and communication (see the 

IN1604 Series 

Product Configuration Software

 help file for additional control information). Topics in this 

section include:

• 

Installing the Software

• 

Starting the Software

• 

Using the Software

• 

Configuration Pages

The graphical interface includes the same functions as those on the device front panel with 
additional features that are available only through the software.
The control software is compatible with Microsoft Windows operating systems. The software 
program is available on the Extron 

website

.

Installing the Software

Figure 20. 

PCS Download from the Extron Website

Summary of Contents for IN1604 DTP





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands