Extron electronics IN1404, User Manual

Page: 34 / 46

IN1404 User’s Manual 32
Command Description
IM3 redetect input mode now
IM? return input mode state
INFO? return unit version
LBL0 set input labels to off**
LBL1 set input labels to on
LBL2 set labels to momentary
LBL3 reset label
LBL? return label state
LBL=xxx load a custom label name, where xxx = the
label text to be displayed (up to 15 characters)
LBL: return label name
LEFT front panel left button
MENU front panel menu button
MSAVxxx save memory xxx (5-128)
MRCLxxx recall memory xxx (5-128)
MRSTxxx reset memory xxx (5-128)
MUTE toggle mute
MUTE0 disable mute**
MUTE1 enable mute
MUTE? return mute state
NOISE+ increase noise filter
NOISE- decrease noise filter
NOISE@ set noise filter to normal (009)
NOISExxx set noise filter to absolute value (000-047)
NOISE? return noise filter
PH+ increase horizontal position
PH- decrease horizontal position
PH@
set horizontal position to normal**
♦
PHxxx
set horizontal position to absolute value
♦
PH? return horizontal position
PHS+ increase phase
PHS- decrease phase
PHS@
set phase to normal**
♦
PHSxxx set phase to absolute value (0-31)
Command Description
PHS? return phase
PV+ increase vertical position
PV- decrease vertical position
PV@
set vertical position to normal**
♦
PVxxx
set vertical position to absolute value
♦
PV? return vertical position
RED+ increase red RGB gain
RED- decrease red RGB gain
RED@ set red RGB gain to normal** (128)
REDxxx set red gain to absolute value (0-255)
RED? return red RGB gain
REF0 set refresh rate to 60hz**
REF1 set refresh rate to 72hz
REF2 set refresh rate to 75hz
REF3 set refresh rate to 85hz
REF4 set refresh rate to 96hz
REF5 set refresh rate to 100hz
REF6 set refresh rate to 120hz
REF? return refresh rate
RES000 factory reset
RES1 reset video
RES2 reset audio
RES3 reset input
RES4 reset output
RES5 reset rs-232
RES000 factory reset
RIGHT front panel right button
SAT+ increase color saturation
SAT- decrease color saturation
SAT@ set color saturation to normal** (128)
SATxxx set color saturation to absolute value
(000-255)
SAT? return color saturation
SCS0 set output resolution to 640 x 480**