FOXBOX Tx / Rx • Remote Control
34
I/O Configuration tab
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
4
4
4
4
4
4
4
4
4
4
Figure 21.
I/O Configuration Tab
Output Configuration panel
Sync Format radio buttons
(see figure 21,
1
) — The FOXBOX receiver outputs RGBHV
or RGsB video (depending on the input to the transmitter) only. The radio buttons in this area
have no effect on the FOXBOX receiver. See the
FOX 500 User Guide
or the
PowerCage
FOX User Guide
if you are using one of those products to receive the fiber optic signal, as
the video output of those products can be configured.
Output Polarity radio buttons
(
2
)
— Click either the
Follow
input
sync
or
Force
sync
to
negative
radio button to select the desired video output sync polarity.
NOTE:
When you make output configuration changes, the setting is changed in the
receiver. It reports the changes to the transmitter via the optional receiver-Tx-to-
transmitter-Rx cable.
If the PC is connected to the transmitter
and
either
the receiver-Tx-to-transmitter-Rx
cable is not connected in your system
or
the receiver is in the daisy chain mode, the
program cannot report the output sync format and polarity position settings in the
Video
Adjustment
panel. You can change the output sync format and polarity, but the
program cannot report the changes.
Video Shutdown Delay panel
NOTE:
•
Video
Shutdown
Delay
is available only for receiver connections.
•
The receiver front panel DIP switch 2 must be on (up) for this command to function.
The video shutdown delay feature mutes the output for a variable period of time when the
unit detects a change in the input pixel clock, preventing glitches when the input video
signal resolution changes. The
Video
Shutdown
Delay
drop-down menu (
3
)
allows you to
change the interval. 0.5 second is the default value.
Plus Mode Transmission panel
NOTE:
Plus
Mode
Transmission
is available for FOXBOX Tx DVI Plus units only, with a
firmware revision of 3.00 or higher.
The
Plus
Mode
Transmission
panel lets you
Enable
and
Disable
transmission mode (
4
).
DDC/EDID Resolution panel
The
DDC/EDID
Resolution
panel lets you set the DDC/EDID resolution and refresh rate (
5
).
Summary of Contents for FOXBOX Rx DVI MM
Page 6: ......
Page 8: ...FOXBOX Tx Rx Contents viii...