Extron electronics FOXBOX Rx DVI MM, User Manual, Page: 31 / 50

FOXBOX Tx / Rx • Remote Control 23
Using the Command and Response Table
The command and response table begins below. Symbols are used throughout the table
to represent variables in the command and response fields. Command and response
examples are shown throughout the table. The ASCII to HEX conversion table below is for
use with the command and response table.
ASCII to Hex Conversion Table
•
Space
Command and Response Table for SIS Commands
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Video
mute
Mute output
1B Blk1
] Blank the video output.
Unmute output
0B Blk0
] Output video.
Show video mute status
B
X!]
Video mute status is
X!
.
EDID / Display Data Channel (DDC) resolution and rate (systems with DVI transmitters only)
Set EDID/DDC resolution
41*
X@
*
X#
#
DDC
X@
*
X#] Select a EDID/DDC Resolution.
Show EDID/DDC resolution 41#
X@
*
X#]
Show the EDID/DDC resolution.
Mode switch position (systems with FOXBOX receivers only)
Show DIP switch position 8#
X$X$]
Show the FOXBOX receiver DIP switch
position.
Output sync format
Set output sync format 6*
X%
#
Syn
X%]
Set the sync format.
Show output sync format 6#
X%]
Output sync polarity
Set output polarity negative
7*1# Pol1
] Force the receiver output to always be
negative.
Set polarity to the input
7
*0
#
Pol0
]
Polarity follows the video sync input to
the transmitter.
Show output sync polarity
7#
X^]
NOTE:
X! = Mute status
0
= off
1
= on
X@ = Resolution
01
= 1920 x 1200
06
= 1365 x 768
11
= 576p
16
= 1440 x 900
02
= 800 x 600
07
= 1366 x 768
12
= 720p
17
= 1280 x 800
03
= 1024 x 768
0
8 = 1400 x 1050
13
= 1080i
18
= 1680 x 1050
04
= 1280 x 768
09
= 1600 x 1200
14
= 1080p
19
= 1360 x 768
05
= 1280 x 1024
10
= 480p
15
= 640 x 480
X# = Refresh rate
1
= 50 Hz
2
= 60 Hz
X$ = Mode switch position
0
= off (down)
1
= on (up)
X% = Output sync format
0
= RGBHV
1
= RGsB
X^ = Output sync polarity
0
= follows input
1
= force sync negative