Extron electronics Ethernet Control Interface IPL T PCS4 User Manual Download Page 55

Page: 55 / 70

5-5

IPL T PCS4 • SIS

™

Programming and Control

PRELIMINAR

X16

Power-up delay between ports in 1/3 second

increments. 1-255 permitted. (Default is 3,
which equals 1 second.)

X18

Hardware (MAC) address (xx-xx-xx-xx-xx-xx).

X19

Subnet mask (xxx.xxx.xxx.xxx). Leading zeros

are optional in setting values in each of four
fields, and they are suppressed in returned
values.

X22

For Verbose/Response Mode:

0 = clear/none
1 = verbose mode
2 = tagged responses for queries
3 = verbose mode and tagged responses for
queries
Default = 0

If tagged responses is enabled, all read commands
return the constant string plus the data, like
setting the value does.

Example:

Command:

Esc

Response: Ipn •

X12

X33

Password (minimum length = 4 characters;

maximum length = 12 characters. No special
characters are allowed.

X34

Daylight saving time (DST) is a 1-hour offset to

reflect the time during which clocks are set
one hour or more ahead of local standard
time, to provide more daylight at the end of
the working day. Supported for the U. S. and
parts of Brazil and Europe.

Example:

Time in California is GMT -8:00

from April to October and GMT -7:00 from
November to March.

DST should be turned off in Hawaii,
American Samoa, Guam, Puerto Rico, the
Virgin Islands, the eastern time zone portion
of the state of Indiana, and the state of
Arizona (excluding the Navajo Nation).

0 = off/ignore
1 = on

X41

Reading password. Responds with four asterisks

(****) in place of the password, if a password
exists. Responds with an empty space if no
password exists.

X45

E-mail event number (1 - 64)

X46

E-mail recipient’s address (e.g.,

[email protected]

)

for the person to whom messages will be
sent.

X47

Name (numeral) of e-mail file to be sent; e.g.,

1.eml, 2.eml, ... 64.eml

X49

Default name: a combination of the model name

and the last 3 pairs of the interface’s MAC
address (e.g., IPL-T-PCS4-00-02-3D).

X52

Connection’s security level

11 = user
12 = administrator

X63

Pulse time in 20 ms per count. If this parameter

is missing or = 0, then pulse length = default
(25 = 500 ms). 35565 ms = max. pulse time.

Symbol definitions

CR/LF (carriage line feed) (hex 0D 0A)

Soft carriage return (no line feed, hex 0D)

(For Web browser commands, use the

[pipe] character instead of the soft return.)

Pipe (vertical bar) character

•

Space

The

superscript indicates commands that give

an E24 (privilege violation) message if you
are not logged in at the administrator level.

Esc

Escape key (hex 1B)

(For Web browsers, use

instead of Esc. )

Power receptacle ( 1-4)

Greenwich Mean Time (GMT) offset value

(-12.00 to +14.00) represents the time
difference in hours and minutes (+/-hh:mm)
relative to Greenwich, England. The plus
sign and leading zero are optional. For
example, 5:30 = +05:30.

On/off status

0 = off/disable
1 = on/enable

Dirty memory status

1 = RAM needs to be saved to flash memory.
0 = RAM has been saved to flash (OK to
power off or reset).

Current threshold sense

0 = clear/none
1 = standby
2 = full
(Full threshold must be set before standby.)

X10

Group number

0 = none
1 = yellow
2 = green
3 = red

(The exponent designates the port number.
The color relates to setting groups via the
front panel.)

X11

Version (typically listed to two decimal places,

e.g., x.xx)

X12

Unit name. The name of the PCS4 is a text

string of up to 24 characters drawn from the
alphabet (A-Z), digits (0-9), and minus sign/
hyphen (-). No blank or space characters are
permitted as part of a name. No distinction
is made between upper and lower case.

The first character

must

be a letter. The last

character must

not

be a minus sign/hyphen.

X13

Local date and time format

Set

format (MM/DD/YY-HH:MM:SS).

Example:

11/18/03-10:54:00.