Extron electronics DVS 204, User Manual, Page: 24 / 52

Installation and Operation, cont’d
DVS 204 • Installation and Operation 2-14
EXTRON
DV S 204D
OUTPUT
CONFIG
MENU
NEXT
IN3 S AVE
<N/A> 1 2 3
IN3 CLR
<N/A> 1 2 3
NEXT NEXT
INPUT
CONFIG
MENU
S aving ( S AVE) memory pre s et s
• Sa ve the c u rrently s elected inp u t' s
s izing a nd centering inform a tion
• Up to 3 pre s et s per inp u t c a n be
s elected < > (N/A i s the def au lt) a nd
sa ved.
• Sa ve a pre s et by pre ss ing the NEXT
b u tton.
Clearing (CLR) memory pre s et s
• Cle a r the c u rrently s elected inp u t' s
sa ved s izing a nd centering
inform a tion
• Up to 3 pre s et s per inp u t c a n be
s elected < > (N/A i s the def au lt)
a nd cle a red.
• Cle a r a pre s et by pre ss ing the
NEXT b u tton.
BLANKING
CONFIG
MENU
MEMORY
PRE S ET
MENU
Save (SAVE) memory preset
From this submenu, the sizing and centering information for the currently
selected input can be saved to memory. Up to three memory presets can be saved
per input.
Using either the Adjust horizontal ( ) or Adjust vertical ( ) knob, select (< >)
either N/A, 1, 2, or 3 to select a preset. The default is <N/A>. To save the preset,
press the Next button.
The presets will save the Sizing and Centering information in non-volatile
memory, so powering down the DVS 204 will not lose the presets. Saving a
preset by pressing the Next button will also advance to the next submenu
(Clear memory preset).
Clear (CLR) memory preset
From this submenu, up to three saved presets for the currently selected input can
be cleared from memory.
Using either the Adjust horizontal ( ) or Adjust vertical ( ) knob, select (< >)
either N/A, 1, 2, or 3 to select a preset. The default is <N/A>. To clear the preset,
press the Next button.
Clearing a preset by pressing the Next button will also cause a return to the
Memory Preset menu.