Extron electronics DVS 204 User Manual Download Page 18

Installation and Operation, cont’d

DVS 204 • Installation and Operation

2-8

Size control button

 —  This button controls the size adjustment on the

display by using the Adjust horizontal and Adjust vertical adjustment
knobs.  See the “Image adjustments” section in this chapter.

Menu button

7

Menu button

 —  Use this button to enter and move through the main menu

system in the DVS 204.  See the “Menus, Configuration, and Adjustments”
section in this chapter for details.

Next button

8

Next button

 —  Use this button to step through the submenus in the

DVS 204 menu system.  See the “Menus, Configuration, and Adjustments”
section in this chapter for details.

LCD menu display and controls

9

LCD

 —  Displays configuration menus and status information.  See the

“Menus, Configuration, and Adjustments” section in this chapter for
details.

10

Adjust horizontal (

) knob

 —  In the menu system, rotate this knob to

scroll through menu options and make adjustments.

11

Adjust vertical ( ) knob

 —  In the menu system, rotate this knob to scroll

through menu options and make adjustments.

12

Infrared sensor

 —  This sensor is used to receive infrared (IR) signals from

the IR-901 remote control.  See the “IR 901 Infrared Remote Control” section
in this chapter.

Optimizing the System for a DVD

For optimal performance, follow the steps in this section in order when setting
up the DVS 204 for a DVD.

Setting up a DVD source

To get the best results when using a DVD as a video source, Extron recommends
that the DVD player itself be setup to output an aspect ratio of 16:9 and not 4:3.
Because all DVDs are mastered as 16:9, having them set up for anything else will
cause the player to internally scale and compress the signal. This scaling/
compression by the DVD player will defeat the advantage of having 3:2
pulldown detection in the DVS 204.

All sizing adjustments to correct aspect ratio should be done using the DVS 204.

To change the output aspect ratio of most DVD players,

1.

Enter the DVD player’s Setup or Action menu while the disc is stopped.

2.

Select a 16:9 aspect ratio.

Summary of Contents for DVS 204





















































Reviews: