Extron electronics DVS 204, User Manual, Page: 20 / 52

Installation and Operation, cont’d
DVS 204 • Installation and Operation 2-10
Main menus
To return to the default screens, let the DVS 204 time-out for 10 seconds, or
press the Menu button until the Exit Menu menu appears, then press the Next
button.
Submenus are accessed from a main menu by pressing the Next button. If
you press the Menu button while a submenu is active, the next main menu
will become active. For example, the menu will change from the Input
Configuration menu or its submenus to the Output Configuration main
menu.
Input Configuration
The following flowchart provides an overview of the Input Configuration
submenus and the options for each setting.
EXTRON
DVS204D
INPUT
CONFIG
MENU
NEXT
INPUT 2
COMPNENT
INPUT 4
RGBcvS
SDI IN
* 1 2 3 <4>
NEXT NEXT NEXT
Input 2 video types
• Composite
• S-video
• Component (default)
Assign SDI to Input #
• 1, 2, 3, 4, * (none)
Input 4 video types
• RGB pass-through (default)
• RGBS
• RGBcvS
NOTE The SDI input can be assigned
to any input. Once assigned to a
specific input, only an SDI signal
can be accepted on that input.
SDI can be disabled by selecting
the *.
NOTE Input 1 can only accept composite
video.
Input 3 can only accept S-video .
Only Inputs 2 and 4 can
be configured for different video
types, although an SDI input can be
assigned from
any Input Configuration
menu.
INPUT
CONFIG
MENU
MENU
OUTPUT
CONFIG
MENU
BLANKING
CONFIG
MENU
MEMORY
PRESET
MENU
ADVANCED
CONFIG
MENU NEXT
MENU
EXIT
MENU
Power
on
EXTRON
DVS204D
2 sec.
2 sec.
INPUT 1
CMPOSITE
852 x
480 @60
2 sec. 2 sec.
NO
SIGNAL
2 sec.
* The No Signal default menu only occurs if
there is no signal present at the currently
selected input connector.