DTP2 T/R 211 • Reference Information
31
Reference
Information
This section provides procedures for mounting the DTP2 211 transmitter and receiver and
disconnecting the ground between them.
•
Mounting the Transmitter or Receiver
•
Mounting the Transmitter or Receiver
ATTENTION:
Risk of property damage:
ATTENTION :
Risque de dommages matériels :
•
Installation and service must be performed by authorized personnel only.
•
L’installation et la maintenance du système doivent être exclusivement effectuées
par le personnel autorisé.
•
Avoid ground potential differences between the transmitter and receiver installation
sites, which can lead to
equipment damage
or a missing or unstable picture. If a
potential difference cannot be avoided, remove the ground connection between the
units and locally power both units (see
•
Évitez les différences de potentiel de mise à la terre entre les sites d’installation
d’émetteur et de récepteur de commutation, qui pourraient endommager
l’équipement ou rendre l’image invisible ou irrégulière. Si une différence de potentiel
ne peut être évitée, enlevez la connexion de mise à la terre entre les unités et
alimentez les deux unités localement (voir
The 1-inch high, quarter rack width, 6-inches deep transmitter and receiver can be placed
on a table, mounted in a rack, or mounted under a desk or table. The receiver can also be
mounted on a projector bracket.
Tabletop Use
Affix the included rubber feet to the bottom of the unit and place it in any convenient
location.
Mounting kits
Mount the unit using the optional compatible mounting kit listed on the Extron
, in
accordance with the directions included with the kit. The devices are compatible with the
Extron Half Rack shelf system HRB
109, Extron UTS under the table shelf system, Extron
rack shelves RSU
126, and MBU
125 under the table shelf brackets.
on the next page.
Summary of Contents for DTP2 R 211
Page 6: ......
