DTP2 T/R 211 • Installation and Operation
10
Securing the HDMI Connector
Follow these instructions to secure the input and output connectors to the transmitter and
receiver with the LockIt HDMI lacing bracket provided:
1
Plug the HDMI cable into the rear panel connection.
2
Loosen the HDMI connection mounting screw from
the rear panel enough to allow the LockIt lacing
bracket to be placed over it. The screw does not
have to be removed.
3
Place the LockIt lacing bracket on the screw and
against the HDMI connector, then tighten the screw
to secure the bracket.
ATTENTION:
•
Do not overtighten the HDMI connector
mounting screw. The shield it fastens to is
very thin and can easily be stripped.
•
Ne serrez pas trop la vis de montage du
connecteur HDMI. Le blindage auquel elle
est attachée est très fin et peut facilement
être dénudé.
4
Loosely place the included tie wrap around the
HDMI connector and the LockIt lacing bracket as
shown.
5
While holding the connector securely against the lacing bracket, tighten the tie wrap,
then remove any excess length.
3
1
1
2
2
3
3
4
4
5
5
Summary of Contents for DTP2 R 211
Page 6: ......
