Extron DTP T UWP 4K D Series • Remote Control
15
Symbol definitions
]
= Carriage return/line feed
}
= Carriage return (no line feed)
|
= Pipe (can be used interchangeably with the
}
character)
•
= Space
E
= Escape key
W
= Can be used interchangeably with the
E
character
X!
= Input number
0
through
2
(
0
= deselect input [break tie]. This results in the output being disabled.)
1
= HDMI,
2
= VGA
X@
= Auto switch mode
0
= disabled (
default
)
1
= enabled (highest active input has priority)
2
= enabled (lowest active input has priority)
X#
= Video mute
0
= Unmute video and sync (
default
)
1
= Mute video to black screen while sync is on
2
= Mute video and sync
X$
= Output 5V mode
0
= Auto (5V enabled when source with 5V present, else off)
1
= 5V always enabled (
default
)
X^
= Output format
HDMI Port
:
0
= Force output to DVI format,
1
= HDMI out if HDMI sink; DVI if DVI sink,
2
= Follow input format (
default
)
VGA Port
:
0
= Force output to DVI format (
default
),
1
= HDMI out if HDMI sink; DVI if
DVI sink
X&
= TMDS pass-thru mode
0
= off
1
= on
2
= auto (
default
)
X(
= Status
0
= off, disabled, or not detected
1
= on, enabled, or detected
X1!
= Input HDCP status
0
= No source is detected
1
= Source is detected with HDCP
2
= Source detected without HDCP
X1@
= Output HDCP status
0
= No sink is detected
1
= Sink is detected with HDCP support
2
= Sink is detected without HDCP support
X1#
= Transmitter name
A text string of up to 24 alphanumeric characters and minus sign or hyphen (-).
No blank or space characters are permitted as part of a name. The first character must
be a letter, and the last character must not be a minus sign or hyphen (
default
is
DTP-T-UWP-4K-232-D-[COLOR]
or
DTP-T-UWP-4K-332-D-[COLOR]
).
X1$
= Raw EDID data
128 or 256 bytes of hexadecimal data
X1%
= Video color bit depth mode
0
= Auto (
default
, based on sink EDID)
1
= force 8-bit
X1^
= Current EDID native resolution and refresh rate in plain text
X1&
= Verbose mode
0
= clear/none
1
= verbose mode (
default
)
2
= tagged responses for queries
3
= verbose mode and tagged for queries
X1*
= Input audio format
HDMI
:
0
= embedded digital audio,
1
= analog audio input,
2
= auto select (embedded digital audio takes priority)
VGA Port
:
0
= disable analog audio embedding,
1
= enable analog audio embedding
X1(
= Pixel phase value
0
to
63
,
default
is
32
X2)
= Total pixels value
±
255
of default value (depends on input rate)
X2!
= Horizontal and vertical start value
0
to
255
(
default
is
128
)
Summary of Contents for DTP T UWP 4K 232 D
Page 7: ......