Extron DTP T UWP 4K D Series • Installation and Operation
3
Installation and
Operation
This section describes the installation and the operation of the extenders, including:
•
Mounting the Transmitter
•
DTP T UWP 4K D Connections
•
Twisted Pair Recommendations for DTP Communication
•
Power Supply Wiring
•
RS-232 Connector Wiring
•
Operation
Mounting the Transmitter
ATTENTION:
•
Installation and service must be performed by authorized personnel.
•
L’installation et l’entretien doivent être effectués par le personnel autorisé
uniquement.
•
The unit must be installed in accordance with the National Electrical Code and with
local electrical and safety codes.
•
L’unité doit être installée conformément au National Electric Code et aux normes
électriques et de sécurité locales.
The transmitters can be installed in a two-gang electrical wall box, or with a mud ring with a
decorator-style wallplate cover (supplied).
UL and Safety Guidelines
The following UL guidelines pertain to the installation of the decorator-style wallplate
transmitters into a wall or furniture.
•
These units are not to be connected to a centralized DC power source or used beyond
their rated voltage range.
•
These units must be installed in UL-listed wall boxes.
•
These units must be installed in a UL-listed junction box with a UL-listed faceplate.
•
This product is intended to be supplied by a power source marked “Class 2” or “LPS”
rated 12 VDC, minimum 1.0 A
Summary of Contents for DTP T UWP 4K 232 D
Page 7: ......