DTP T EU 4K 331, DTP T EU 4K 231, DTP T MK 4K 331, and DTP T MK 4K 231 • Installation and Operation
5
`
0.7
A MAX
POW
ER
12V
1.800"
(45.72 mm)
2.165"
(55.00 mm)
3.169"
(80.50 mm)
1.521"
(38.41 mm)
1.521"
(38.41 mm)
0.398"
(10.10 mm)
3.169"
(80.50 mm)
2.165"
(55.00 mm)
2.165"
(55.00 mm)
2.165"
(55.00 mm)
1.800"
(45.72 mm)
1.521"
(38.41 mm)
1.800"
(45.72 mm)
1.800"
(45.72 mm)
3.386"
(86.00 mm)
3.386"
(86.00 mm)
EU Unit, Front
MK Unit, Front
Front, With Bezel
Device Module
Either Unit, Rear
EU Unit, Side
MK Unit, Side
0.394"
(10.00 mm)
Figure 2.
Dimensions
Choose a location that allows cable runs without interference.
NOTE:
Cables may need to be installed in the wall or conduits before the unit is
installed.
Install the junction box or European cable channel system (see
Installing the Junction
Box or European Cable Channel System
on page 6).
NOTE:
Refer to the manufacturer for more junction box installation requirements.
Route and connect cables to the rear panel connectors (see
Installation Features
on
page 7).
Mount the unit into the junction box (see
Mounting the Transmitter
on page 12).
Connect input to the front panel connector (see
Front Panel Connection
on page 15).
