5
Cable Cubby 500 and 700 • Installation Guide (Continued)
Step 2 — Under the table, adjust the side clamps on the enclosure.
Installing Retractors
NOTE:
To lower the side
clamp, turn the lever
down, then press and hold
the locking plate while
sliding down the clamp.
Locking
plate
Horizontal or Angular Mounting
For installation details, see the
Cable Retractor
Setup Guide
available online at
www.extron.com
.
Secure the clip on the pin.
Insert retractors into
the retractor trim.
Secure the locking screw on each retractor.
Do not overtighten.
Insert the pin through the
retractor mounting hole on
the side of the Cable Cubby
and retractor assembly.
1
2
3
4
For horizontal or angular mounting, remove
these orientation screws (front and back),
then follow the steps shown at left.
Rotate the side clamp
outward and ensure that
the lever is down.
Slide the clamp all the way
up against the bottom of
the table.
Ensure the Cable Cubby
is firmly seated in the table.
Raise the lever to secure
the Cable Cubby.
Lever
1
2
3
