AXI 22 AT and AXI 44 AT • Dante Controller
26
To rename an AXI Receiver:
1.
From the
Device
menu on the
Network View
screen, select
Device View
, or press
<Ctrl+D>
on the keyboard. The
Device View
dialog box opens.
2.
From the
(Select a Dante Device...)
drop-down menu, select the name of the
desired AXI device (see figure 29,
1
)
3.
On the
Device View
screen, select the
Receive
tab (
2
).
4.
Click the name of the Receiver to be renamed. The name becomes a text field with a
cursor (
3
).
5.
Enter the new name (up to 31 characters) using any combination of letters, numbers,
and special characters except for
@
,
=
, and
.
(period).
6.
Press
<Enter>
on the keyboard or click another channel name to confirm the new
name.
7.
Repeat steps 4 through 6 to rename additional Receiver channels.
8.
When finished renaming Receivers, close the
Device View
dialog box.
Figure 29.
Renaming a Receiver
Renaming a Transmitter
The default names shown in the
Dante Transmitters
column are extracted from the
connected Dante device (see
figure 28
,
2
on the previous page). The AXI Transmitters
are labeled
Mic/Line In 1
through
Mic/Line In 4
because the mic/line inputs transmit
signal onto the Dante network.
TIP:
It is essential that Dante Transmitter channels be named before audio
subscriptions are established. Existing subscriptions are removed when Transmitter
channels are renamed.
figure 29
Renaming a Receiver
