AXI 22 AT and AXI 44 AT • Dante Controller
23
Renaming the AXI 22 AT or AXI 44 AT in Dante Controller
TIP:
It is essential that Dante devices are named before audio subscriptions with
other devices are established. Existing subscriptions are removed when a device is
renamed.
NOTE:
Dante device naming can also be done via DSP Configurator (see
6
under
Tools
on page 14).
1.
Ensure that the host PC and the AXI are connected to the same network.
2.
From the control computer start menu select:
All Programs>Audinate>Dante Controller>Dante Controller
.
3.
The
Dante Controller - Network View
screen opens. All Dante devices on the
network are discovered and listed.
4.
From the
Device
menu, select
Device
View
or press
<Ctrl+D>
on the keyboard (see
figure 23).
Figure 23.
Opening Device View
5.
The
Dante Controller - Device View
dialog opens. Select the device being
configured from the
(Select a Dante Device...)
drop-down (see figure 24,
1
).
Figure 24.
Device View and Select a Dante Device Drop-Down
NOTE:
If there are multiple AXI devices connected to the network that have not been
renamed, obtain the Dante device media access code (MAC) address of the desired
device from the white label on the rear panel of the device in order to identify it in Dante
Controller.
The
Device View
dialog populates with the selected AXI information.
Figure 25.
Populated Device View Dialog Box
figure 23
Opening Device View
figure 24
Device View and Select a Dante Device Drop-Down
figure 25
Populated Device View Dialog Box
