2 Insert the screws into the holes and use the screw-in anchors if needed.
Note
Leave 1/8” gap between the screw head and the wall.
Figure 13: Mounting the AP directly on a dry/wood wall using the Philips Pan-Head
screws
3 Insert the Ethernet cable’s RJ45 connector into the LAN1/GE1 port.
4 Align the AP against the screw heads and slide it down. Ensure that the AP is secured in place and
tightened. If the AP is loose, unmount the AP and decrease the distance between the screw head
and the wall. Remount the AP.
Mounting to a Junction/Gang box
Mounting the AP3915e to a junction/gang box requires a WS-MBI-WALL04 bracket, which must be
purchased separately.
1 Remove the screws from the junction/gang box.
Installation Process
ExtremeWireless™ AP3915e FCC/ROW Install Guide
23
