4 Philps pan-head screws directly onto the wall (not recommended).
Mounting to a wall using the Main Mounting Bracket
The main mounting bracket (#37201) ships with the AP and can be used to mount the AP onto a wall.
This is the recommended method of installation for a wall mounting procedure.
1 Use the mounting bracket as a template and mark the hole centers on the wall.
Figure 5: Main mounting bracket
2 Insert the screws into the holes of the mounting bracket and use the screw-in anchors if needed.
3 Insert the Ethernet cable’s RJ45 connector into the LAN1/GE1 port.
4 Insert the AP onto the bracket’s four feet and slide it down to lock it in place.
Note
The feet of the bracket must be pointing up.
Installation Process
ExtremeMobility™ AP510i FCC/WR Installation Guide
15
