Mounting to a Wall using an optional Wall and Box Bracket
Mounting the AP to a flat ceiling requires the WS-MBI-WALL04 (#30516) bracket, two Philips Pan-head
screws, and two screw-in anchors. They must be purchased separately.
1 Install the WS-MBI-WALL04 bracket on a wall/ceiling with the two screws and screw-in anchors.
Note
The locking tab on the WS-MBI-WALL04 bracket must be on the top side during
installation.
Figure 6: Mounting the AP using the WS-MBI-WALL04 Bracket
•
Use the WS-MBI-WALL04 as a template and mark the holes to be used to mount the AP. It is
recommended to use the holes marked "A" or "B".
•
Drill the holes and attach the bracket using the screws and screw-in anchors.
Note
When using the "A" or "B" holes, if the holes are not near the corners of the bracket, you
can break off the corner to decrease the bracket's visibility once the AP is installed.
Installation Process
ExtremeMobility™ AP510i FCC/WR Installation Guide
16
