Extreme Networks Summit WMScanner, User Manual

Page: 30 / 217

WMScanner GUI and Menus
Summit WMScanner Users Guide
28
View Menu - Building Floor
This menu option is a fly out menu which helps you to adjust the display of different floors in the
building. Use the commands in this menu to control the visibility of a floor, and to specify the “current”
floor. While floors other than the current floor may be made visible, the current floor is the default floor
for many operations in Summit WMScanner
Window
Zooms a particular area/window in the drawing. Once the window zooming is
activated, click and hold the left mouse button while moving the mouse up or
down to zoom in or out. Press ESC to cancel.
Pan
Use Pan to move left, right, up or down in your view of the drawing. Pan is an
alternative to using the scrollbars. When this menu option is selected, the
cursor changes to a hand, and allows the user to drag the screen image around
with the left mouse button. From this mode, the right mouse button brings up
the zoom menu. Press ESC to cancel.
Zoom Extents
Zooms to display the entire drawing. Zooming to the drawing extents will
effectively show all of the visible objects in the drawing window.
Refresh Screen
Refreshes the display. Use this command when partitions or other drawing data
disappear that should be visible. This is sometimes necessary if a command is
cancelled by hitting the ESC key when the command is partially completed. If
a command is aborted prior to the completion process, the display may be left
in an interim state. The Refresh Screen command will bring the display up to
date.
Building Floor
Opens a fly-out menu that include commands for selecting and viewing floors.
See “View Menu - Building Floor” on page 28 .
3D Views
This command allows you to have menu access to the 3D Orbit and Top Views.
Shade
The commands under this fly-out menu allows users to view the model in 2D
wireframe or with shading enabled. See “View Menu - Shade” on page 30 .
Advanced >
Display Order
This command allows you to change the display order of a image that has been
imported into the drawing. Changing the display order will change whether
other entities in the drawing are displayed in front of or behind the image.
Entities that are displayed behind an image may not be visible.
When this command is selected, you are prompted in the text window at the
bottom of the main program window, to select items. These items are the
images whose display order will be changed. Left-click on the image that is
obscuring your partitions, to select it, then right click. You will receive a
prompt in the text window asking how the display order is to be changed.
Typing ‘B’ for back, and hitting the return key will move the partitions to the
back of all other visible entities. Use of the other options, that is, moving
images to the front, or putting them above or below specific partitions, is not
recommended.
Advanced > Set
Displayed Drawing
Information
This command brings up a Display Options dialog described in “Advanced -
Set Displayed Drawing Information Dialog” on page 31 .