Extreme Networks Summit WMScanner, User Manual

Page: 185 / 217

Summit WMScanner Users Guide
183
Convert Partition Type
The Convert Partition Type button lets you convert individual wall entities from one type of partition to
another. Select the type of partition you want to convert to using the pull down menu on the Change
Partition Type dialog box, then press the
Select button. Individual entities must first be selected by left-
clicking on them. Then, right-click to change the intended partition type.
If you accidentally select the wrong entity, deselect it by holding down the SHIFT key and left-clicking
on the partition. Use the
ESC key to return to the Convert Partition Type dialog box. See “Change
Partition” on page 199 for more information on converting partition types.
Process Unformatted Layers
The Process Unformatted Layers button lets you return to the Format CAD Drawing dialog box that the
Floor Formatting Wizard uses to allow you to process the layers of a CAD file that contains unformatted
entities.
It is unlikely that you will ever need to return to this dialog once a floor has already been formatted,
but the functionality is provided here just in case.
NOTE
Layers will not be available for formatting if you choose to delete the remaining unformatted entities after formatting
the CAD drawing
See “Format CAD Drawing” on page 192 for more information on formatting a CAD file using the
Process Unformatted Information dialog box.
Clear Floor
The Clear Floor button allows you to empty the contents of a floor and return the floor to the
unformatted state.
CAUTION
There is no way to undo the Clear Floor option, so only use it if you intend to reformat a floor using the Format Floor
Wizard.
Snap to Endpoint
The Snap to endpoint when scaling floor or setting floor alignment point option will allow you to more
precisely click exactly on the end point of a line in the drawing. Check this option to able the automatic
snap of the mouse cursor to the end points of lines.
Importing Images Using Insert
If you want to add a raster image or other type of drawing file to the current drawing, select
Format Building > Insert . The fly-out submenu contains commands for adding different types of images
to your drawing.