Extreme Networks Summit WMScanner, User Manual, Page: 59 / 217

Summit WMScanner Users Guide
57
Click the Pick Point button and then click on the drawing to re-record the x, y points. Enter the WGS84
latitude and longitude for these newly recorded points. Click the OK button to exit the dialog box by
recording the edited values; click the Cancel button to exit the dialog box without recording the new
values and ignore the new changes.
Utilities - Drawing Legend
Selecting Utilities > Legend opens the Drawing Legend dialog.
:
●
The information you enter in the Drawing Legend dialog box is for your reference and may be filled
out with any text that you wish. The check boxes in the lower left corner of the Drawing Legend
dialog box allow you to set what information the legend may display automatically. Once you have
configured the legend, use the
Set Position button to configure where the legend will be displayed on
the drawing. When you press the Set Position button, you will then be prompted to click in the