Extreme Networks Summit Summit1i, Hardware Installation Manual

Page: 26 / 65

1-12 Summit Switch Hardware Installation Guide
Summit Switch Overview
When connected to a Summit RPS, the Summit switch can provide status on power and
fan operation of the RPS through SNMP, the command-line interface, and the Web
interface.
The Summit RPS can simultaneously provide power for as many as two Summit
switches.
MAC Address
This label shows the unique Ethernet MAC address assigned to this device.
Reset Button
The reset button is used to hard reset the switch. Use a non-conductive tool to push the
reset button.
Summit4, Summit24, and Summit48 Switch
LEDs
Table 1-4 describes the light emitting diode (LED) behavior on the Summit4,
Summit4/FX, Summit24, and Summit48 switches.
.
Table 1-4: Summit4, Summit24, and Summit48 Switch LED Behavior
Unit Status LEDs
LED Color Indicates
Power Green
Yellow
The Summit switch is powered up.
The Summit switch is indicating a power, overheat, or fan failure.
MGMT Green flashing
■
Slow
■
Fast
Yellow
The Summit switch is operating normally.
Power On Self Test (POST) or software download in progress.
The Summit has failed its POST.