Extreme Networks Summit 300-48, Software User'S Manual

Page: 163 / 198

Displaying Router Settings
Summit 300-48 Switch Software User Guide 163
The example in Figure 18 is configured as follows:
create vlan Finance
create vlan Personnel
config Finance add port 2,4
config Personnel add port 3,5
config Finance ipaddress 192.207.35.1
config Personnel ipaddress 192.207.36.1
enable ipforwarding
Displaying Router Settings
To display settings for various IP routing components, use the commands listed in Table 59.
Resetting and Disabling Router Settings
To return router settings to their defaults and disable routing functions, use the commands listed in
Table 60
Table 59: Router Show Commands
Command Description
show iparp {<ipaddress | vlan <name> |
permanent} Displays the IP Address Resolution Protocol
(ARP) table. You can filter the display by IP
address, VLAN, or permanent entries.
show iparp proxy {<ipaddress> {<mask>}} Displays the proxy ARP table.
show ipconfig {vlan <name>} Displays configuration information for one or
all VLANs.
show ipconfig {vlan <name>} {detail} Displays IP configuration settings.
show ipfdb {<ipaddress> <netmask> | vlan
<name> } Displays the contents of the IP forwarding
database (FDB) table. If no option is
specified, all IP FDB entries are displayed.
show ipstats {vlan <name>} Displays IP statistics for the CPU of the
system.
Table 60: Router Reset and Disable Commands
Command Description
clear iparp {<ipaddress> | vlan <name>} Removes dynamic entries in the IP ARP table.
Permanent IP ARP entries are not affected.
clear ipfdb {<ipaddress> <netmask> | vlan
<name>] Removes the dynamic entries in the IP
forwarding database. If no options are specified,
all IP FDB entries are removed.
disable bootp vlan [<name> | all] Disables the generation and processing of
BOOTP packets.
disable bootprelay Disables the forwarding of BOOTP requests.