Extreme Networks SENTRY, Manual

Page: 4 / 24

EN
CAR VIDEO RECORDER
CAUTION!
THE RECORDER HAS A BUILT-IN BATTERY MAINTAINING ITS OPERATION.
IF YOU ARE NOT USING THE RECORDER FOR AN EXTENDED PERIOD:
- FULLY CHARGE THE BATTERY OF THE RECORDER
- STORE THE RECORDER IN A DRY AND COOL PLACE
- CHARGE THE BATTERY OF THE RECORDER EVERY 6 MONTHS.
SUCH ACTIONS WILL EXTEND THE LIFE OF THE BATTERY!
FAILURE TO CHARGE THE BATTERY OF THE RECORDER AT LEAST
ONCE EVERY 6 MONTHS RESULTS IN PERMANENT DAMAGE TO THE
BATTERY AND LOSS OF WARRANTY.
NOTE:
• The device is not a toy. Unsuitable for children under the age of 6. Children over the age of
6 should use the device only under the supervision of an adult.
• Do not drop the recorder and do not hit it against hard surfaces. Protect it against mechanical
damage.
• Do not expose to fire.
• Do not place the recorder in places with high humidity and avoid contact with water.
• Do not disassemble the device. In case of damage contact a proper service centre.
• Do not dispose of a used recorder in a waste bin. It should be delivered to a waste
electronic equipment collection centre.
• Protect the product against extreme temperatures, direct sunlight, strong vibrations, high
humidity, moisture, flammable gases, vapours and solvents.
We congratulate you on the purchase of the XDR102 SENTRY car recorder.
Before use get acquainted with the manual and rules for using the device safely. Uninstructed
use may result in damaging the device.
The description of connectors and switches.
1. LCD screen
2. Up/Mute.
3. Settings menu.
4. The confirmation button (OK); Turning the recorder on/off.
5. Operating mode change button.
6. Down. Activating/deactivating the IR night backlight.
7. The reset button.
8. Lens.
9. Microphone.
10. Night backlight IR LED.
11. TF card slot (microSD).
12. Charging port (mini USB).
13. Recorder handle attachment.
1. Starting the operation of the car video recorder.
Before activating the recorder, place a memory card in the microSD card slot (11). Connect
the recorder via the provided power supply cable to a car lighter socket.
Caution!
For safety reasons, enter the settings menu (3) and set all recording parameters before driving.
Attach the recorder handle to the windscreen, secure the recorder in the handle and connect the
power supply of the recorder by means of the provided power supply cable.
2. Turning the recorder on/off.
Activation/deactivation of the recorder proceeds by holding the OK button (4).
If the recorder is connected by means of the power supply cable to the car lighter socket, it will
turn on automatically upon starting the car.