background image

 

Chapter 2: Installing the Ridgeline 3.0 Server

Ridgeline Installation and Upgrade Guide

26

jboss ports 3873, 8080 (default), and 8083, which allow the Ridgeline server to talk to the client

HTTP port 8334, which allows switches to talk to the Ridgeline server in HTTPs mode

FreeRADIUS port 10559 (default)

TCP port 56983 for the client to connect to the server in NAT-enabled environments

7

Restart the Ridgeline server, as described in the previous section.

Installing Ridgeline on a Multi-Homed Server

A multi-homed server is one that has more than one network interface card (NIC) installed, and might 
be using multiple IP addresses. If you are installing Ridgeline on a multi-homed server, you must 
specify which of the server’s IP addresses the Ridgeline server uses. Ridgeline clients use this IP 
address to connect to the Ridgeline server, and the Ridgeline server uses this IP address for 
communication with its managed devices. To set the IP address for the Ridgeline server, you configure 
the EPICENTER_SERVER_ADDRESS environment variable on the server.

For the Ridgeline client to successfully login to a multi-homed server. One of the following two requirements must be 
met:

You must launch the client through a hostname, instead of an IP address. 

The EPICENTER_SERVER_ADDRESS environment variable must be set to one of the IP addresses of the 
server, and you must use that IP address to launch the client.

Setting the EPICENTER_SERVER_ADDRESS Environment 
Variable

When you configure the EPICENTER_SERVER_ADDRESS environment variable, the Ridgeline server is available 
only on this interface on the multi-homed machine. To connect to the Ridgeline server from a Ridgeline client, use the 
specified IP address. On the managed devices, the specified IP address is registered as an SNMP trap receiver.

NOTE

Before proceeding, stop the Ridgeline server if it is currently running. See the 

“Starting and Stopping the 

Ridgeline Server” on page 24

 for information about how to do this.

To set the EPICENTER_SERVER_ADDRESS environment variable, do the following:

In Windows:

1

From the 

Start

 menu, select 

Settings > Control Panel

.

2

Double click on the System icon to bring up the System Properties window.

3

Click the Advanced tab and the 

Environment Variables

 button. 

4

In the Environment Variables dialog box, under System variables, click 

New

5

In the New System Variable dialog box, enter EPICENTER_SERVER_ADDRESS in the Variable name 
field.

6

Enter the IP address to use for communication between the Ridgeline server and the managed 
devices in the Variable value field, and click 

OK

.

Summary of Contents for Ridgeline 3.0





























































Reviews: