b. For a mid-mount, position the bracket so that the flange (ear) is positioned slightly more than
halfway between the front and back of the switch, as shown in figure below:
Attaching a Short
Mounting Bracket (Ear): Middle of Switch
.
Figure 20: Attaching a Short Mounting Bracket (Ear): Middle of Switch
c. Use four small mounting screws (provided) to attach the bracket to the switch.
2. Attach the other short mounting bracket to the other side of the switch housing, as you did in step 2.
3. Attach a long mounting bracket to one side of the switch housing and to the rack post.
a. Position the long bracket over the holes between the front and the middle of the switch. Orient it
so that its flange (ear) rests against the rack post.
See the diagrams below:
Attaching a Long Mounting Bracket: Front of Switch
and
Attaching a
Long Mounting Bracket: Middle of Switch
.
Attaching the Switch to a Two-Post Rack
Installing Your Switch
46
ExtremeSwitching SLX 9150 Hardware Installation Guide
