The completed assembly is shown in the Figure
Completed Installation: Switch in 4-Post Rack
.
Figure 18: Completed Installation: Switch in 4-Post Rack
13. Verify that the switch is leveled and is firmly attached to the rack.
If your switch comes with installed AC power supplies, skip to
on page 58 .
If your switch does not have an installed power supply, install one or two power supplies using the
instructions in
Installing a 750 W Internal AC Power Supply
on page 51 .
Attaching the Switch to a Two-Post Rack
You can attach your switch to a two-post rack in either of two configurations:
•
Front mount
•
Mid-mount
The side of the switch has different sets of holes for attaching mounting brackets in either configuration.
Brackets for a two-post mount are not included in the box with your switch. However, they can be
ordered separately using part number XN-2P-RKMT299.
Attaching the Switch to a Two-Post Rack
Installing Your Switch
44
ExtremeSwitching SLX 9150 Hardware Installation Guide
