•
T-bar maximum base thickness must not exceed 0.055 in. (1.4 mm).
•
Ceiling tile over the T-bar must be flat, all the way across.
The main mounting bracket is used on a T-bar when the ceiling model is a suspended or drop ceiling
and when there is a T-bar on the ceiling.
1 Remove the ceiling tiles.
2 Push and rotate the main mounting bracket on the T-bar in such a way that the center angled
locking tabs of the main bracket gets attached to the T-bar.
Figure 4: Install the main mounting bracket on a T-bar
3 Place the access point on the bracket feet and slide it down to lock it in place.
Hold the access point and rock it back and forth to ensure that it is securely mounted.
4 Replace the ceiling tiles.
5 Attach the RJ45 connector to the GE1 port.
Install the Access Point
ExtremeMobility™ Access Points AP410i/e
18
