Altitude 3510 Access Point Installation Guide
5
1
Introduction
The Extreme Networks
®
Altitude
™
3510 Access Point (AP) provides a bridge between
Ethernet wired LANs or WANs and wireless networks. It provides connectivity between
Ethernet wired networks and radio-equipped
mobile units
(MUs).
The AP3510 provides a maximum 54Mbps data transfer rate via each radio. It monitors
Ethernet traffic and forwards appropriate Ethernet messages to MUs over the network.
It also monitors MU radio traffic and forwards MU packets to the Ethernet LAN.
An AP3510 can be adopted, configured and managed from a wireless controller. The
management of the AP3510 is conducted by a controller, only after the AP3510 connects
to a Summit
®
WM3600 or Summit WM3700 model controller and receives its
configuration.
The Extreme Networks AP3510 Access Point comes with a dual 802.11a+g radio and
external antenna. The AP model number is based on the regulatory domain which is
determined by the country of use:
The following power adapters must be used with the above access points if PoE is not
chosen as the power source:
If new to the AP3510 and access point technology, refer to the
Altitude 35x0 Access Point
Product Reference Guide
to familiarize yourself with access point technology and the
feature set exclusive to the Extreme Networks AP3510. The guide is available, at
http://www.extremenetworks.com/go/documentation
.
Part Number
Model Number
Regulatory Domain
15720
AP3510-US
For use in the US only
15721
AP3510-ROW
For use in Europe & Rest of World (RoW)
15723
AP3510-IL
For use in Israel only
Part Number
Model
15728
Power Supply-Altitude 3510 (for use only with AP3510 access point)
