Altitude 3510 Access Point Installation Guide
23
LED Indicators
The AP3510 utilizes seven LED indicators. Five LEDs display within four LED slots on
the front of the AP3510 (on top of the AP3510 housing) and two LEDs (for above the
ceiling installations) are located on the back of the device (the side containing the LAN,
WAN and antenna connectors).
The five LEDs on the top housing of the AP3510 are clearly visible in table-top, wall
and below ceiling installations. The five AP3510 top housing LEDs have the following
display and functionality:
Boot and Power Status
Solid
white indicates the AP3510 is
adequately powered.
Error Conditions
Solid
red indicates the AP3510 is
experiencing a problem condition requiring
immediate attention.
Ethernet Activity
Flashing
white indicates data transfers and
Ethernet activity.
802.11a Radio Activity
Flickering
amber indicates beacons and data
transfers over the AP3510 802.11a radio.
802.11b/g Radio Activity
Flickering
green indicates beacons and data
transfers over the AP3510 802.11b/g radio.
$ATA/VER%THERNET
A2ADIO!CTIVITY
BG2ADIO!CTIVITY
0OWERAND%RROR#ONDITIONS3PLIT,%$
