Extreme Networks Altitude 300-2, Getting Started Manual

Page: 45 / 62

Reglatory Compliances
Altitude 300-2™ Getting Started Guide 45
wireless port is North American, Japan, or Taiwan reglatory domains all
sequential wireless port must be the same reglatory domain otherwise
additional wireless port will not be allowed to come up.
NOTE
The end user is responsible to enter the proper country code for the country of
intended use. Extreme Networks is not liable for improper country code
configuration.
NOTE
Extreme Networks has not certified the Altitude 300-2
TM
with any third party
antennas. To assure compliance, use only “Extreme Networks” certified
antennas.
The Poe WLAN switch will automatically configure the Wireless Access point to
operate within the proper frequencies and power outputs determined by the
country code entered. Incorrectly entering the country of operation may result
in illegal operation and may cause harmful interference to other systems. The
user is obligated to ensure the device is operating according to the channel
limitations, indoor/outdoor restrictions and license requirements for each
country as described in this document. Please refer to Software Installation
Guide for list of country codes or go to
http://www.extremenetworks.com/go/rfcertification.htm for the most up to
date information.