Extreme Networks ACC-BKT-AX-BEAM Accessories Manual Download Page 28

Page: 28 / 35

Outdoor Mounting Accessory Installation

Install the Access Point on a Pole Using AH-ACC-STRP-MRN Accessory

on page 28

Install the Access Point on a Flat Surface Using AH-ACC-BKT-ASM Accessory

on page 30

Ground Connection

on page 32

Learn about various outdoor mounting accessories that can be used to install the access point.

The outdoor mounting accessories can only be used with outdoor access points. The outdoor mounting
accessories must be purchased separately.

Install the Access Point on a Pole Using AH-ACC-STRP-MRN Accessory

Install the access point on a vertical or horizontal 3 in. to 7 in. diameter pole using the AH-ACC-STRP-
MRN accessory.

Before You Begin

The following hardware is required for installation the access point to a vertical pole or a horizontal pole:

•

An access point (AP460C, or AP460S6C, or AP460S12C)

•

Two AH-ACC-STRP-MRN accessory, which is an outdoor access point stainless steel hose strap for 3
in. to 7 in. diameter poles.

Tip
The best practice is to mount the access point to a pole with a minimum circumference of
3 in.

Important
You must provide your own cable clamps if you are mounting the access point to a pole
that is less than 3 in. or more than 7 in. in diameter.

Tip
The best practice is to use a stainless-steel cable clamp that is 0.5 in. (12.7 mm) wide.

•

A flat-head slotted screwdriver to tighten the clamp screws.

Wi-Fi 6 (802.11ax) Access Points

Summary of Contents for ACC-BKT-AX-BEAM




































Search results

Summary of Contents for ACC-BKT-AX-BEAM

Reviews:

Related manuals for ACC-BKT-AX-BEAM

Brands by name

Popular brands

Extreme Networks ACC-BKT-AX-BEAM, Accessories Manual

Search results

Summary of Contents for ACC-BKT-AX-BEAM

Reviews:

Related manuals for ACC-BKT-AX-BEAM

Brands by name

Popular brands