E
TREME
X
INE
- 30 -
4. Assembly Instructions
On the pictures of the following pages (ref. no. 4) you can see all possibilities for mounting the
radiant heater.
Please take care that the radiant heater is securely and firmly connected with the surface it is
supposed to be mounted on. The mounted fastening elements must have a tensil and shear
strength of at least three times as much of the weight of the radiant heater that is to be moun-
ted, including all accessories. For mounting use appropriate screws and dowels (not included in
scope of delivery).
The radiant heater may never be mounted in a vertical position.
The accessories and attachments listed below are part of the available standard range. Since
special versions are also available, please demand the respective assembly and manual instructi-
on from the trader or manufacturer.
By reason of simplification, only one of the mounting brackets is pictured in the assembly
instruction. Please not that always two mounting brackets are required to securely mount the
device. Always take care that both of the mounting brackets are mounted exactly one after ano-
ther in a row and that the security clips must be aligned contrarily and are adjusted outwardly.
Please consider the mounting minimum of the device (ref. point 7 dimensions).
Further information and mounting possibilities can be found at www.extremeline.de
4.1 RADIANT HEATER - mounting possibility 1
On the left picture you see the mounting bracket MH and the order how to mount it. The picture
on the right side shows the mounted mounting bracket MH.
Keep to the mounting order
List of components:
2x mounting bracket MH
2xspacer DAHS4
2x hanger bolt
2x washer M6
2x allen bolt M6
